Chapter 2 - Installation
14
FG-260 - Quick Startup Guide
Ethernet ports
The FG-260 is equipped with two 10/100 Base-T Ethernet interface
receptacles (RJ45). The Ethernet interface labeled EtherNet/IP is to be
connected to an EtherNet/IP network. The Ethernet interface labeled
PROFINET is to be connected to a PROFINET network.
The Ethernet port corresponds to the IEEE 802.3 with the pin assignment
shown below.
EtherNet/IP:
Pin
Signal
Description
1
TX+
Transmit signal positive
2
TX-
Transmit signal negative
3
RX+
Receive signal positive
4
Not used
Drain wire
5
Not used
Drain wire
6
RX-
Receive signal negative
7
Not used
Drain wire
8
Not used
Drain wire
