Chapter 6 - Asset Management
Version EN-062020-1.00
27
13. Click
[Apply]
in the
PROFIBUS Control Panel
to save all settings and confirm with
[Yes]
.
The PROFIBUS Control Panel tests the connection to the EtherNet/IP Gateway. After a short while, the
yellow question mark is replaced by a green check mark. If a red cross appears instead, check the
network cables and the IP settings of your PC and the gateway. Ensure that the PC and the EtherNet/
IP Gateway are on the same IP subnet.
14. Click
[OK]
to close the
PROFIBUS Control Panel
.
