dataFEED edgeGate - Quick Startup Guide
20
Copyright 2017 Softing Industrial Automation GmbH
6
Declaration of the manufacturer
This device complies with the requirements of the EC directive 2004/108/EG,
"Electromagnetic Compatibility" (EMC directive). It meets the following requirements:
Emission:
-
EN 55011
Limits and methods of measurement of radio disturbance
characteristics of industrial, scientific and medical (ISM) radio
frequency equipment, group 1, class A
-
EN 55022
Information technology equipment; Radio disturbance
characteristics; Limits and methods of measurement, class A
-
EN 61000-6-4
Electromagnetic compatibility (EMC); Part 6-4: Generic
standard – Emission standard for industrial environments
Immunity:
-
EN 61000-6-2
Electromagnetic compatibility (EMC); Part 6-2: Generic
standard - Immunity for industrial environments
A Declaration of Conformity in compliance with the above standards has been
made and can be requested from Softing Industrial Automation.
ROHS
The dataFEED edgeGate device is ROHS compliant.
Note
To fulfill the EMC requirements, the other components of your installation (DC
adapter, Industrial Ethernet devices, etc.) also have to meet the EMC
requirements. A shielded cable must be used. In addition, the cable shield
must be grounded properly.
