edgeGate - Quick Startup Guide
10
© Softing Industrial Automation GmbH
Mounting
1. Hook the upper notch of the cut-out on the
edgeGate back into a 35 mm DIN rail.
2. Press edgeGate down towards the rail until it slides
into place over the lip of the locking bar.
Note
Do not put stress on the device by bending or torsion.
Dismounting
1. Slide a screwdriver diagonally under the housing into
the locking bar.
2. Lever the screwdriver upwards, pull the locking bar
downwards - without tilting the screwdriver - and
move the gateway upwards off the rail.
