Softing BC-600-PB, Руководство пользователя

Страница: 27 / 44

BC-600-PB Display and Control in Stand-Alone Mode
Softing Page 27
The PROFIBUS status is shown in line 2. The following displays are possible:
3. The PROFIBUS is not connected:
•
Display: “DP n/a”
4. The PROFIBUS is connected, but no master is active:
•
Display of the static RS485 bus voltage,
e.g. “DP 1015 mV stat.”
5. The PROFIBUS is connected and one or more masters are active:
•
Display of the detected baud rate, e.g. “DP 1.5 Mbit/s”
The status of the integrated master simulator is shown in line 3. The following
displays are possible:
1. The master simulator is disabled:
•
The display remains blank.
2. The master simulator has been enabled manually (see page 36 ):
•
Display: “M.Sim. ON”
The only control on the main display is the down arrow key with which you can
select the individual functions.