SoftBank 202Z, Быстрый старт

Страница: 4 / 12

*Tip
The handset can also be charged without using Charger. Connect one end of
Micro USB to AC Adapter and the other end directly to Battery Port on the side
of the handset.
・ informs you that the battery is getting low and needs to
be charged. To charge it, use the steps below. If the red LED
on the handset lights up, the battery starts charging. When
appears on the display, the battery is fully charged.
AC Adapter
Plug
Micro USB Cable
Wall outlet
❶ Connect one end of Micro USB Cable to AC Adapter
and the other end to the plug on the back of Charger.
❷ Plug in AC Adapter to a wall outlet.
❸ Insert the handset in Charger.
❶
❷
❸
Charging
the
Battery
Charging
the
Battery
Charger
・To turn the handset on and off, press Power
Button following the directions below.
Turn the handset off in hospitals, aircraft and
areas where you are instructed to do so.
*Tip
The handset can also be turned on
without using the pin pusher.
If you charge the handset, it turns on.
Lift Battery Port
Cover latch.
Use the pin pusher (provided
with the handset) to push
Power Button for longer than
2 seconds.
❶
❷
Turning
the Handset
On and Off
Turning
the Handset
On and Off
5 6