Sodi RS3 KZ DD2, Руководство пользователя и по обслуживанию

Страница: 20 / 50

10/2022
20
EN
USER AND MAINTENANCE MANUAL
5.2.4 - Adjustment of the camber
● Ideally adjust the eccentrics at the bottom.
Description of the eccentric
Front
1
3
2
Rear
1
4
Legend
1 Eccentric
2 Screw on the fork
3 Marked slot
4 Mark
(1 = 0.5°, 2 eccentric marked 1 gives 1°)
Camber - More positive
Front
Rear
1
1
Eccentrics at the bottom:
● The mark is positioned towards the outside of the
chassis.
Camber - More negative
Front
Rear
1
1
Eccentrics at the bottom:
● The mark is positioned towards the inside of the chassis.
Standard adjustment
● 1° lower eccentrics place in negative camber position .
Increase the camber
● Same position as the Camber - More negative, p. 20
but replace the lower 1° eccentric by the 2° eccentric.
Reduce the camber
● Same position as the Camber - More positive, p. 20 .
●
If eccentrics are to be used in extreme
conditions, use higher degrees eccentrics and
refer to the ITAKA web site.
●
Some negative camber generally improve the
performances of the kart.