This document can not be reproduced or released without the Sodikart authorization.
MAN.LPG.EN.00
05/2012
User maintenance guide
5
USE SPArE PArtS of SodiKArt oriGiN
L
PG
3 - Engine
● Check that the maintenance and operating manual
for the engine has been supplied. If not, contact
SODIKART at the address below.
● For gas go-karts, use LPG (liquid petroleum gas)
only.
4 - Start up of the go-kart
1
2
6
5
3
Legend
1 reservoir
2 Steam relief valve
3 Carburettor
5 Primer
6 Valve
● Open the valve (6) on the tank (1).
● Press the 'primer' (5) for two seconds.
● Start up the go-kart as you would start a petrol one.
●
●
Ensure●that●the●tank●contains●enough●gas.
●
●
Ensure●that●there●are●no●leaks●in●the●
system●(see●Chap.●1).
5 - filling the LPG tank
1
6
7
8
9
Legend
1 reservoir
6 Valve
7 Gauge
8 Quick-fit coupling (optional)
9 filling unit
● Fill directly on the go-kart, or separately if your
go-kart is equipped with the tank quick-fit coupling
system (8).
● Close the main valve (6) before filling the tank (1).
● Ensure that the filling system matches the fitting on
the tank (9).
● Connect the gun to the filling unit (9) and fill the
tank.
● Filling will stop automatically when the tank is 80%
full (watch the gauge (7)).
●
●
Always●refer●to●the●general●safety●rules●
before●carrying●out●any●work●on●the●LPG●
feed●system.
►
do not attempt to overfill the tank
beyond this limit: danger!
