socomec MASTERYS BC 15, Инструкция по установке и эксплуатации

Страница: 6 / 48

6
MASTERYS BC
15-40 kVA - Ref.: IOMMASBCXX09-EN 01
The packaging guarantees the stability of the UPS during shipping and physical transfer. Carry the packaged unit as close as possible
to the installation site.
When moving the unit on even slightly sloping surfaces, use the blocking equipment and braking devices to ensure
that the unit does not fall over.
2.1. SHIPPING AND MOVING
• The UPS must remain in a vertical position during all shipping and moving operations.
• The unit has wheels that can be used to move it for short distances.
• Ensure the floor is strong enough to support the weight of the UPS and battery cabinet, if used.
Avoid pressing on the front panels when moving the unit.
The UPS MUST only be moved by two people at least. They MUST take position at the sides of the UPS with
respect to the direction of movement.
CAUTION IF DAMAGED
NON-SPILLABLE BATTERIES
If packaging is crushed, ripped or open such that the inner contents are revealed, the
equipment should be kept in an isolated area and inspected by a qualified person. If the
packaging cannot be shipped the contents should be collected promptly, kept apart, and
the sender or recipient should be contacted.
All packaging must be recycled in compliance with existing legislation in the country where the system is installed.
2. UNPACKING AND INSTALLATION OF THE UNIT
Battery is NOT connected!