Chapter 5 : Menus
UPS/NTA GB/ DELMX_EXPC1C3C6.B
page 34
12.6.2.List of STATUS for single units and modular systems
Wording Comments
Bypass mains out of tolerances
Bypass mains absent
Emergency stop
External information
Battery charging
Battery charging current > Battery floating current
Monitoring in remote mode
Following a command on the control panel, the remote
control is master
SC conducts
ON request for static switch
Operation in ECO mode
Operation on generator set
External information
Static switch KM40 closed
Auxiliary contact of static switch KM40
Output switch Q3 closed
Auxiliary contact of switch Q3
Maintenance bypass switch Q5 closed
Auxiliary contact of switch Q5
Synchronise to bypass supply
The inverter synchronisation source is the bypass mains
Synchronise to external supply
The inverter synchronisation source is the external mains
(UPS with ACS option)
12.6.3.List of STATUS for central bypass systems
List of STATUS for central bypass cabinets
Wording Comments
Bypass mains out of tolerances
Bypass mains absent
Emergency stop
External information
Monitoring in remote mode
Following a command on the control panel, the remote
control is master
Static switch conducts
The static switch is controlled
Operation on generator set
External information
Units 1, 2, 3, 4, 5 and 6 operating
Switch Q3 closed
auxiliary contact of switch Q3
Switch Q5 closed
auxiliary contact of switch Q5
Synchronise to bypass supply
The inverter synchronisation source is the bypass mains
Synchronise to external supply
The inverter synchronisation source is the external
mains (UPS with ACS* option)
Load supplied by the inverter
Load supplied by the mains
Load not supplied
Load supplied by maintenance bypass
List of STATUS for each module
Wording Comments
Emergency stop
External information
Battery charging
Battery charging current > Battery floating current
Operation on generator set
External information
Static Switch KM40 closed
Auxiliary contact of static switch KM40
Output switch Q2 closed
Auxiliary contact of switch Q2
