4
Installing the Eye Bolts
8. Attach your Happy Bag and Happy Hour Cup Holder to the loveseat, hang loveseat from the
eye bolts (see instructions below) or frame, and enjoy!
Locate the ceiling beam/joist by using a stud finder or tapping
and verifying with a small nail. Be sure to locate the exact
center of the ceiling joist for the most secure installation.
Using a 3/16” (3mm) wood drill bit, drill a starter hole
(approx. 4” or 10 cm deep) perpendicular to the ceiling.
Screw in the supplied eye bolts until all threads have
disappeared into the joist. Do not loosen or adjust once in
place.
Caution:
We highly recommend using only a gentle to and fro
motion. Swinging or spinning could loosen the eye bolts from
the ceiling joist and compromise the sturdiness. We highly
recommend hanging the loveseat no more than 18” above the
ground and not exceeding a maximum weight
recommendation of 550 pounds.
When hanging the loveseat, be sure the ropes are not tangled
or caught behind the spreader bars. The ropes must be free
and clear when lifting the loveseat.
With a person on each side, lift the loveseat and connect the
S-hooks (provided in the hardware kit) to the eye bolts in the
ceiling beam (or frame if that’s what you’re using to hang the
loveseat). If the eye bolts are too high, use the chains
(provided in the hardware kit) to bridge the gap between the
eye bolts and the S-hooks.
Содержание CHARLESTON LOVESEAT WOOD
Страница 2: ...1 Key A B C D...
