5
3.
Insert the installation CD into the CD-ROM drive of the host PC.
4.
Use
My Computer
or
Windows Explorer
to access your CD-ROM drive.
5.
In the CD contents, click on the correct
DriverSetup.exe
file for your version of
Socket Go Wi-Fi!
6.
The InstallShield wizard will begin. Follow the wizard to install the software.
7.
After installing the appropriate card drivers, install Wi-Fi Companion. Return to the
CD contents and click on
WIFISoftwareSetup.exe
. Follow the wizard to install the
software
8.
After installing Wi-Fi Companion, disconnect your Pocket PC from the host PC.
9.
Soft reset your Pocket PC by pressing the reset button.
Note: Software registration is not required to use Socket Wi-Fi Companion software
with a Socket Go Wi-Fi! card.
6
STEP 2: Insert the Socket Go Wi-Fi! Card into Your Pocket PC
Insert the Socket Go Wi-Fi! card into your Pocket PC. In most cases, the card should be
inserted right-side up. Do not use excessive force, or damage may occur.
Note: To remove an SD card, press it into the slot. A spring will push the card out. Do
not remove by simply pulling, or damage may occur.
Status Indicator LEDs
E300/P300 Link LED
LED LED
Behavior
Meaning
Off
Radio disabled/cannot transmit.
Slow flash
Radio on, not connected.
Link
On Connected
E500 LEDs
LED LED
Behavior
Meaning
Off
Radio disabled/cannot transmit.
Flashing
Radio on, using Power Save Mode
Power
Green
On
Radio on, not using Power Save Mode
Off
Radio disabled/cannot transmit.
Slow flash
Radio on, no data traffic.
Activity
Amber
Rapid flash
Connected. Faster flash denotes
greater network activity.
P500 LEDs:
LED LED
Behavior Meaning
Off
Card power off
Power
Green
On
Card power on.
Off Not
connected.
Flashing Transmitting/receiving
data.
Activity
Blue
On
Connected.