CHAPTER 2: SETUP FOR WINDOWS MOBILE
11
STEP 5: Connect Scanner to Pocket PC via
Bluetooth
1. Turn on the Cordless Hand Scanner. Press the small
power button on the handle of the scanner for five
seconds, until you see the LED turn blue. The LED
should blink blue once every second to show that the
Bluetooth
radio is on but not connected. If the LED
begins blinking red, the battery needs to be recharged.
WARNING: Do not use the Cordless Hand Scanner when
it is being charged, or the battery may have problems
achieving a full charge in the future.
2. Prepare the
Bluetooth
hardware for your Pocket PC. If
using the Socket SDIO or CF card, insert it into your
device.
Make sure the
Bluetooth
radio is turned on
.
Refer to the documentation for your
Bluetooth
hardware
for instructions.
3. Start SocketScan. Tap
Start | Programs | SocketScan
.
4. The SocketScan icon should appear in the task tray
(visible in the
Today screen), indicating that your device is not currently connected to
the CHS. Tap on the icon. In the pop-up menu, select
Connect CHS
.
If the
Connect CHS
option does not appear, use the Socket CHS
configuration utility to enable SocketScan for use with the CHS. See
Step 4 on the previous page.
Important!
Your Pocket PC cannot
connect to the CHS if you
have another device
assigned as your favorite or
default
Bluetooth
serial
device. If necessary,
remove any settings that
designate another device as
your favorite or default
Bluetooth
serial device.
