2
SS0018V2
1. Safety
1.1 Equipment Markings
1.2 Operational Safety
The Socket & See Dead Circuit Finder is designed for use by suitably qualified
personnel familiar with electrical supply systems.
Before using your dead circuit finder please read these instructions and safety
warnings. Failure to comply with the safety warnings or use of the unit in a
manner not specified by Socket & See may result in serious injury or damage to
equipment.
Although the DCF200 is easy to use it does require the user to have sufficient
knowledge of electrical supplies to be able to identify the difference between
LIVE (energised) and DEAD (un energised) cabling.
This product is for use on dead circuits only
DO NOT
connect to a live supply.
2. Description
The Socket and See DCF200 is intended for use on DEAD CIRCUITS ONLY and
can be used for.
●
Fuse finding - Find which MCB or Fuse is feeding the dead circuit
●
Wire tracing - Trace wires through floors and walls
●
Wire picking - Pick the correct wire from a bundle or loom
●
Wire break detection - find an open circuit in a damaged wire
●
Circuit identification - find a circuit by identifying the individual conductor
Caution - refer to the instruction manual
Construction is double insulated
Product should be recycled as electronic waste
Conforms to EU standards
