SOC VTR-4000B Evaluation and Product Development Platform
Quick-Start Guide
V1.1, 2017
© 2007- 2017 SOC Technologies Inc. | (519) 880-8609 | [email protected]
®
Page
5
of
6
•
Ethernet cable connected from Encoder board to Decoder board.
2.
Encoder TX IP matches Decoder IP.
5.
On-board User Interface
Label
Notes
System Reset
S3 (Push-button)
Reset the carrier board system
API Mode Cycle
S2 (Push-button)
Toggles API Mode (See
6. API
Interface
)
API Mode LED
D11 (LED)
See API Mode LED table
API Mode LED
Linked Endpoint
On
Carrier Board API
Off
Module API
6.
API Interface
When the USB-UART Cable is connected from board to PC, the PC will expose a serial (COM) port.
You can find this port in Windows in
Device Manager > COM Ports.
Use the following settings for
the serial port:
o
Baud rate: 115200
o
Data bits: 8
o
Parity: None
o
Stop bits: 1
o
Flow control: None
The serial link is shared by the carrier board and the module endpoints, one at a time. The API
endpoint mode can be cycled by pressing the API Mode Cycle button S2. API Mode LED D11
indicates the endpoint that is currently linked.
Endpoint
API Functions Available
Documentation
Carrier Board API
•
Network Configuration
(send/receive IP/port)
•
Test-pattern Generator
•
VTR-4000B API Manual