FMC-MCM-1000 Evaluation and Product Development Platform
© 2008- 2013 SOC Technologies Inc. | (519) 880-8609 | [email protected]
®
Page
11
of
19
The SOC FMC-MCM-1000 Reference Design provides an example of using M88E1111_BAB1C000.
3.6 Serial Flash Memory
The serial flash memory, N25Q128A13EF740F, is used to store the firmware of the FPGA. For
evaluation, the I/O drivers and the Ethernet/UDP/IP network stack are pre-stored in the
N25Q128A13EF740F. When the FMC-MCM-1000 is booted, the firmware stored in the
N25Q128A13EF740F will configure the FPGA and make the board a plug-and-play device for
evaluations of the SOC MPEG codec modules.
After the evaluation, users can store their own firmware into the N25Q128A13EF740F for product
development. Users can license the I/O driver and the Ethernet/UDP/IP network stack IP core in
“netlist” format for product development uses.
The method of downloading the firmware into the N25Q128A13EF740F is detailed in Appendix-C.
4. Ordering Information
The FMC-MCM-1000 can be ordered from SOC directly or through the distributors of SOC. Refer to
the SOC web site,
www.soctechnologies.com
, for distributor locations and contact information.
SOC contacts:
E-mail:
Telephone:
1-519-880-8609
