Rev1.1 2016 Nov.
2
Introduction
Installation
Selecting a Site for the Equipment
EX120-TP: 10/100/1000BASE-T(X) Ethernet Extender over Coaxial Cable
with Power over coaxial (Master)
EX120-RP: 10/100/1000BASE-T(X) Ethernet Extender over Coaxial Cable
with IEEE 802.3at, PoE+ Ethernet port (Slave)
This chapter gives step-by-step installation guide for the PoE Extender
over Coaxial.
As with any electric device, you should place the equipment
where it will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select should
meet the following requirements:
1.
The ambient temperature should be between 0 to 50 degrees
Celsius.
2.
The relative humidity should be less than 90 percent, non
condensing.
3.
Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 61000-4, Level 3 field
strength.
4.
Make sure that the equipment receives adequate ventilation.
5.
The power outlet should be within 1.8 meters of the device.
