SOARNEX EM210 series, Быстрое руководство по установке

Страница: 6 / 10

Rev1.0 2015 Nov
Dip Switch
There is a dip switch for the setting on copper and fiber port. Refer to
the table below for more details.
Switch 1
Switch 3
Switch 5
Switch 2
Switch 4
Switch 6
* When switch to Forced Mode, the Auto
MDI-X function will turn off and become
MDI mode.
On
On
On
On
On
On
Fiber Half Duplex
TX 10M
LLR Enable
TX Forced Mode
TX Half Duplex
LLCF Enable
Off
Off
Off
Off
Off
Off
Fiber Full Duplex
TX 100M
LLR Disable
TX Auto-Negotiation
TX Full Duplex
LLCF Disable
LED Indicator
The LED indicators give you instant
feedback on status of the converter:
LEDs
PWR
(Power)
100M
(100Mbps)
FDX
LINK/ACT
FAIL
Status
Lights on
Off
Lights on
Off
Lights on
Lights off
Blinking
Lights on
Lights off
Blinking
Lights on
Lights off Indication
Power on
Power off
Runs at 100Mbps on TX port
Runs at 10Mbps on TX port
Connection in full duplex mode
Connection in half duplex mode
Data collision
A valid network connection established
Not Linking
Data transmitting or receiving
The physical line is broken
The physical line is fine
Note: By hardware control, fiber link LED light up when RX/TX both link.