Cheeper
Assembly instruction
SoaringModels
3
Materials and tools for the installation of the model:
Picture 1.2. Materials and tools
1)
Liquid superglue (Akfix
702);
2)
Superglue activator;
3)
Epoxy;
4)
Masking tape;
5)
Sandpaper №240-320;
6)
Drills
Ø
2,
Ø
5;
7)
Needle file (round and
flat);
8)
Pliers;
9)
Screwdriver;
10)
Ruler;
11)
Stationery knife;
12)
Pencil.
Necessary radio equipment for the assembly:
1)
Battery 250-300 mAh, recommended sizes 17*30 mm;
2)
Servos Dymond D-47 (4 pieces);
3)
6-channel receiver.
2.
Assembly
2.1.
Insert of control horns
Cut the grooves for the control horns with a knife as it is shown in the pictures
2.1-2.4
In the rudder in the right in the middle
In the elevating rudder at the distance of 103 mm from the left edge
In ailerons at the distance of 40 mm from the centre of the wing
Paste in the control horns using the epoxy.
Avoid contact of the superglue with the foam plastic of the wing and the tail
cores!