Willow Way
Replacing Wires – cont.
•
Some wires may have a Ferrule on them, to anchor a single wire. Observe how they are
tied. If you lose your Ferrule, you may use a small washer or nut to replace it.
•
The wire goes through the hole, around and back over the wire itself. Take a few turns
around the wire.
•
It helps to hold the Ferrule or nut with pliers while wrapping the wire around itself. If you
have, a small vise to hold the Ferrule this makes wrapping it tight much easier.
Don’t forget to use a Rubber Mallet on your Air Cutter or Manual Cutter,
Loaf Frame when cutting difficult soap.
If you take care of your wires, they will last many years.
Thank you very much for you purchase.
Visit us at… www.soapequipment.com - 765-530-0307 or 870-429-8230
If you experience any difficulties with your equipment, have questions or suggestions, please call Technical Support
at 765-530-0300, or email us at [email protected]
Ferrule
