SNUPI Technologies WallyHome, Руководство по эксплуатации продукта

Страница: 7 / 19

Now that you have planned your attack, connect your Hub to your router with
the orange Ethernet cord provided. Next, using the white power cord, connect
the Hub directly into an outlet. Avoid using a power strip whenever . Once both
You will see a spinning orange wheel and a message stating “Listening for a
signal directly from the Hub.”
At this point, you may continue installation on a mobile device. If you prefer not
to move to a mobile device, simply press the grey button labeled “Continue” and
proceed as directed. If you prefer to continue on a mobile device, please skip to
page to learn how to access your account on a mobile device and continue
installing sensors.
Once the Hub connects to the network, your installation page will progress to:
Note: It may take a couple
of minutes for the Hub to
connect to the network
and download updates.
Power up
the Wally Gateway
Use Ethernet cable to plug Wally into
your router.
Plug directly into the wall outlet.
Note:
It may take up to two minutes after
the gateway is plugged in for us to
“hear” it.
Animation
SIGNOUT NEED HELP ?
Once you have established your plan of attack and connected your Hub, you will
need to now activate all of your sensors. Each grey tile represents an inactive
sensor on your dashboard. To activate a sensor, click on the orange “Activate
This Sensor” link of the sensor you wish to activate. Once you click this button,
you will be directed to the
“Activate a Sensor” page.