SNR SNR-S212i-8POE Series, Руководство по установке

Страница: 44 / 63

SNR-S212i-8POE Installation Guide Hardware installation
Shop.Nag.Ru 2016 34
Figure 4-5 Installing the wall-mount plane on the wall
4.3 Grounding device
Connecting the grounding cable properly is an important guarantee to lightning
protection, shock proof, and anti-interference. When installing and using the device,
ensure that the grounding cable is properly connected; otherwise, personnel injury or
equipment damage may be caused.
Install the grounding cable as below:
Step 1
Unscrew the grounding terminal counterclockwise, remove the screws and shims, and keep
them for later use, as shown in Figure 4-6.
Figure 4-6 Unscrewing the grounding terminal
Step 2
Sheathe the flat shim, grounding OT terminal, and spring shim in sequence over the screw.
Step 3
Reinstall the screw to the grounding terminal, and tighten the screws clockwise, as shown in
Figure 4-7.