SnowWolf AlphaBlower 36-106-P, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 76

25 AlphaBlower Operation and Maintenance Manual
Operation
Hydraulic Couplers
• Thoroughly clean the quick couplers
before making connections. Dirt can
quickly damage the hydraulic system.
AVOID BURNS
Hydraulic fluid, fluid tubes, fittings and
quick couplers can get hot when
running the tractor and snow blower. Be
careful when connecting and
disconnecting quick couplers.
Connecting Hydraulic Couplers:
Remove any dirt or debris from the surface of both
the male and female couplers, and from the
outside diameter of the male coupler. Visually
check the couplers for corroding, cracking,
damage, or excessive wear. If any of these
conditions exist, replace the coupler(s).
NOTE: Do NOT hammer on or heat up couplers
to connect or disconnect. Doing so will
damage couplers resulting in leaks.
Install the snow blower male couplers into the
female couplers of the machine. Pull on the
coupler connection to verify that the male couplers
are securely fastened.
Checking AlphaBlower Operation
NOTE:
After installing the snow blower, test all
functions before operating the snow
blower in the work area.
AVOID INJURY OR DEATH
•
Never start the tractor from outside the
cab.
•
Never operate the snow blower if any
safety device is damaged, disconnected
or missing.
•
Never exit the tractor with the engine
running.
It is the operator’s responsibility to know
which tractor control operates each function
of the snow blower prior to operating the
snow blower in the work area.