![background image](http://html.mh-extra.com/html/snowmasters-special-effects/big-bear/big-bear_manual_1310590001.webp)
Congratulations on your purchase of this SnowMasters foam machine. With your foam
machine you will dazzle and entertain audiences in large or small venues. Your Big Bear
Foam Machine is manufactured with many features, but at the same time it is very easy
to use.
The Big Bear is a recreational foam generator used for creating an entertaining environment for
parties, nightclubs, and fun special effects. Its sleek design makes it a popular appliance for years
and years of foam making. The Big Bear will produce large quantities of foam in a short period of
time (10-20 minutes), so there is fun for all as soon as the Big Bear is activated.
CAUTION: YOU MUST READ THE FOLLOWING BEFORE OPERATING
THE Big Bear Foam Machine.
The Big Bear is an electric product and not a toy. Adult supervision is continuously necessary to
avoid the risk of electric shock or personal Injury.
It should not be operated or placed where
small children can reach it.
Always keep fingers away from the fan guard and never remove
the guard or the electronic enclosure cover. Children should also always stay away from the solution
container at all times to minimize the risk of shock or drowning.
The Big Bear generates a layer of foam on every surface that obscures ground vision and can
cause slipping. Always prepare your foaming area using a flat surface free of obstructions, such as
steps, standing water, cables, ledges, electronic equipment, rocks, toys, and sharp objects before
generating foam.
Never place the pump in water or remove the pump from the water while the Big Bear is plugged
into an electronic socket.
Always use a plastic container to hold solution.
Do not run the Big Bear while the solution container has a water or solution level lower than 1/8”.
Never use water with a temperature greater than 104 Degrees F. Never use any ingredient in your
solution container other than water and/or your Snow Master’s foam solution. If you do not follow
these directions, the pump and Big Bear can be damaged.
Always operate the Big Bear on a dry, level surface. The cables and hose should be routed so that
pedestrian traffic cannot trip over the cable or hose.
Never leave the Big Bear unattended while operating. Do not operate it in the rain or in standing
water. Do not place the Big Bear within 10 ft (3 meters) of a swimming pool, steps, or a ledge
without a guardrail.
Use Caution when adjusting the vertical aim of the Big Bear nozzle, since it may rotate freely when
unlocked and contact (injuring) someone underneath the cone.
Always use an outlet with an earth grounding receptacle and a Ground Fault Circuit Interrupt (GFCI).
Never use this product for any activity other than for what it is intended.
1
G
en
er
al
In
fo
rm
at
io
n
WELCOME
Important Information About your Big Bear Foam Machine
IMPORTANT PRODUCT AND SAFETY INFORMATION
Failure to follow these instructions can cause serious bodily injury or property damage.