background image

13

6.  If only using the base unit, turn the water supply tap  

on completely. 

7.  Push the safety lock on the spray gun handle, then press 

the trigger for a few seconds until the water flow is steady. 

Operating the pressure washer in this manner will allow 

air to escape and discharge residual pressure in the hose 

(Fig. 20). 

8.  Keeping the trigger pressed, turn on the unit by pressing 

the On/Off button on the control panel. Using the "Pressure 

Select" feature, you can also choose from three different 

pressure settings by pressing the + or - button on the right 

side of the control panel (Fig. 21).  

NOTE: This machine is equipped with 3 selectable power/

pressure levels. See table below for detailed specs. 

9.  When re-starting the motor, always keep the  

trigger pressed.

  NOTE: The motor only runs when the trigger is operated 

and shuts off when the trigger is released.

Using the Nozzles

Before beginning any cleaning task, determine the best nozzle  

for the job. Each nozzle has a different spray pattern. The 

nozzle patterns are 40˚ (for gentle cleaning), 25˚ (for all-purpose 

cleaning), 15˚ (for tough jobs), and 0˚ (for spot cleaning or hard-

to-reach areas) .

m

CAUTION! 

NEVER change nozzles without locking the 

safety lock on the trigger handle.

m

WARNING! 

High-pressure jets can be dangerous if 

subject to misuse. The jet must not be directed at persons, 

pets, live electrical equipment, or the appliance itself. 
This cordless pressure washer is equipped with four (4) Quick-

Connect nozzles that easily snap onto the Quick-Connect 

collar of the spray wand.

To connect a nozzle to the spray wand:

1. 

Turn off the pressure washer, remove the bucket or 

 

shut off the water supply. Pull the trigger to release 

 

water pressure.

2.  Lock the safety lock on the trigger handle by pushing on 

the safety lock until it 

clicks 

into the slot.

3.  Pulling the quick-connect collar backwards, at the same 

time, snap the desired nozzle onto the quick-connect 

collar until it 

clicks

 into place, then release the quick-

connect collar (Fig. 22).

Fig. 19

Connect to water supply

Garden hose

Fig. 20

Trigger

Safety lock

+

PO

WER

PRESSURE SELECT

Fig. 21

Control panel

Power

Light 

indication

Rated flow

Rated 

pressure

– On

– Off

– Off

Low

0.68 GPM

500 PSI

– On

– On

– Off

Medium

0.74 GPM

650 PSI

– On

– On

– On

High

0.79 GPM

800 PSI

Fig. 22

Nozzle

“Click”

Quick-Connect collar

Spray wand

Содержание SUNJOE SPX6001C

























Отзывы: