background image

12

3.  Place the battery pack into the charger by sliding the 

pack as shown to lock it into position. When you insert 

the battery into the charger, the bottom red light will 

illuminate to indicate that the battery is charging (Fig. 13).

4.  When the bottom light turns green, the battery is fully 

charged (Fig. 14).

NOTE: If the top light remains green while the bottom light 

alternately flashes red and green, this indicates a temperature 

abnormality (i.e. that the battery pack is either too hot or too 

cold). If there is only a red blinking light, this indicates that 

something is wrong with the battery. Contact Snow Joe

®

 + 

Sun Joe

®

 customer service center at 1-866-SNOW-JOE  

(1-866-766-9563) for assistance.

5.  A fully discharged iBAT40 battery pack with an internal 

temperature in the normal range will fully charge in up 

to 3 hours (between 32ºF/0ºC and 113ºF/45ºC). A fully 

discharged iBAT40XR battery pack with an internal 

temperature in the normal range will fully charge in 

up to 3.5 hours (between 32ºF/0ºC and 113ºF/45ºC). 

A fully discharged iBAT40XRP battery pack with an 

internal temperature in the normal range will fully charge 

in up to 5 hours (between 32ºF/0ºC and 113ºF/45ºC).

Heavily cycled battery packs may take longer to charge 

completely.

6.  If the charging light indicator alternately blinks red and 

green or the light indicator does not come on at all, check 

that the battery pack is fully seated into the bay. Remove 

the pack and reinsert. If the problem persists, contact the 

Snow Joe

®

 + Sun Joe

®

 customer service center at  

1-866-SNOWJOE (1-866-766-9563) for assistance.

7.  When charging is complete, remove the battery from the 

charger by pulling the push lock button and sliding the 

battery backward to unlock it from the charger (Fig. 15).

8.  Timely recharging of the battery will help prolong the 

battery's life. You must recharge the battery pack when 

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully 

discharged as this will cause irreversible damage to the 

battery. 

Fig. 13

green

Power on

Fig. 14

green

green

Fully charged

green

red

Charging

Green

Flashing red/green

Temperature abnormal

Flashing red only

Something is wrong

Fig. 15

Push lock button

Содержание SUNJOE SPX6001C-CT-RM

























Отзывы: