13
2. Flip the surface cleaner over and align the dual-nozzle
rotating sprayer with the attachment of the surface cleaner
(Fig. 24).
3. Once aligned, firmly twist the locking collar on the dual-
nozzle rotating sprayer clockwise to lock securely into
place (Fig. 25).
4. Fit the surface cleaner extention wand into the surface
cleaner attachment and turn the rotatable end-piece of the
wand until the two parts are completely locked together
(Fig. 26).
5. Disconnect the Quick-Connect spray wand from the
trigger gun (Fig. 20).
6. To connect the surface cleaner assembly with the trigger
gun, firmly push the locking tabs of the surface cleaner
extension wand into the slot of the trigger gun and turn
the rotatable end-piece of the wand until the two parts are
completely locked together (Fig. 27).
Shutting down
1. Turn the switch to the OFF (0) position and unplug the
power cord from the outlet.
2. Turn off the water source.
3. Hold the trigger to release water pressure.
4. Disconnect the garden hose from the water inlet on
the unit.
5. Disconnect the high-pressure hose connection on the
trigger gun handle.
6. Release the trigger and engage the gun safety lock.
m
WARNING!
Turn off the water supply and squeeze the
trigger to depressurize the unit. Failure to do so could result in
personal injury due to discharge of high-pressure water.
Taking a break
If you are taking a break of five minutes or more between
cleaning tasks:
1. Engage the gun safety lock (Fig. 15).
2. Turn the switch to the OFF (0) position.
3. Unplug the power cord from the outlet.
Storage
m
CAUTION!
Always store your pressure washer in a
location where the temperature will not fall below 32ºF (0ºC).
The pump in this machine is susceptible to permanent damage
if it freezes. FREEZE DAMAGE IS NOT COVERED BY THE
WARRANTY.
• Store the pressure washer indoors in a dry, covered area
where it is not subject to adverse weather conditions.
• It is important to store this product in a frost-free area.
• Always empty water from all hoses, the pump, and the
detergent bottle (if using) before storing.
Fig. 24
Dual-nozzle
rotating sprayer
Surface
cleaner
Surface
cleaner
attachment
Fig. 25
Dual-nozzle
rotating
sprayer
Locking
collar
Fig. 26
Surface cleaner
extension wand
Surface cleaner
attachment
Fig. 27
Trigger gun
Surface cleaner assembly
