background image

14

m

WARNING! 

Before reusing, completely flush the unit  

out with clear water. Anti-freeze products can damage 

paintwork, so you must ensure there is no anti-freeze left in the 

system before using it again.

Maintenance

m

CAUTION! 

Before working on the pressure washer, 

disconnect the plug from the power supply socket.

1.  To ensure good performance, check and clean the water 

inlet filter (Fig. 26). Remove the pre-filter and water inlet 

filter and rinse with warm water to prevent any foreign 

matter from clogging the pump (Figs. 27 – 28).

2.  Clean the nozzle with the needle clean-out tool provided 

(Fig. 29). Remove the spray wand from the gun; remove 

any dirt from the nozzle hole and rinse.

Disposal

Recycling the washer

•  Do not dispose of electrical appliances as unsorted 

municipal waste. Use separate collection facilities.

•  Contact your local government agency for information 

regarding the collection systems available.

•  If electrical appliances are disposed of in landfills 

or dumps, hazardous substances can leak into the 

groundwater and get into the food chain, damaging your 

health and well-being.

•  When replacing old appliances with new ones, the retailer 

is legally obligated to take back your old appliance for 

disposal at least free of charge.

S Support

If your Sun Joe

®

 SPX2004-RM electric pressure washer 

requires service or maintenance, please call the Snow Joe

®

 + 

Sun Joe

®

 customer service center at 1-866-SNOWJOE  

(1-866-766-9563).

Model + Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Fig. 26

(FRONT)

Garden hose adapter

Water inlet filter

pre-filter

Fig. 27

Inlet filter

Fig. 28

Pre-filter

Fig. 29

Needle clean-out tool

Record the following numbers from the housing or handle of your  

new product:

S P X 2 0 0 4 - R M

Model #:

Serial #:

Содержание Sunjoe SPX2004-GRY-RM





















Отзывы: