background image

10

Operation

m

IMPORTANT! 

This pressure washer is equipped with 

a micro-switch sensitive to water flow. This Total Stop System 

(TSS) senses water flow in the pump. When the trigger is 

released, water stops flowing through the pump. The TSS then 

automatically turns the motor off to protect the pump from 

overheating, thus saving energy and prolonging pump life.

1.  Position the washer as CLOSE as possible to the water 

supply.

2.  The washer must be used on a secure and stable surface 

in a standing, upright position (Fig. 13). 

3.  Turn the water supply tap on completely.
4.  Unlock the safety lock, then press the trigger for a few 

seconds until the water flow is steady. Operating the 

pressure washer in this manner will allow air to escape 

and discharge residual pressure in the hose (Fig. 14).

5.  Keeping the trigger pressed, turn the switch to the ON (I)

position to start the pressure washer.

6.  When re-starting the motor, always keep the trigger 

pressed.

  NOTE: The motor only runs when the trigger is depressed 

and shuts off when the trigger is released.

Using the adjustable spray wand

m

WARNING! 

High-pressure jets can be dangerous if 

subject to misuse. The jet must not be directed at persons, 

pets, live electrical equipment, or the appliance itself.

1.  The washer is equipped with an adjustable nozzle.
2.  The water pressure can be adjusted from low pressure (–) 

to high pressure (+) by turning the pressure adjustment 

knob. The nozzle tip can be adjusted from pencil spray 

(wide open tip) to fan spray (narrow tip) by turning the 

nozzle tip adjustment knob (Fig. 15).

m

WARNING! 

Do not adjust the nozzle while the trigger 

is squeezed. Failure to do so could result in damage.

Recommended cleaning procedure

1.  For additional cleaning power, a detergent spray  

bottle attachment (Model SPX1DT) is available as an  

add-on accessory for the SPX1501. Visit snowjoe.com  

to purchase.

m

CAUTION! 

Only use detergents specifically 

recommended for use with pressure washers.

2.  Load the bottle with a suitable, non-corrosive detergent 

and attach it the spray gun (Fig. 16).

Fig. 13

RELEASE

Fig. 14

Trigger

Safety lock

Push to release

high-pressure hose

Fig. 15

Fan spray

Pencil spray

Pressure 

adjustment knob

Nozzle tip 

adjustment knob

Nozzle tip

Fig. 16

Detergent spray bottle 

(Model SPX1DT)

Содержание SUNJOE SPX1501

















Отзывы: