2
FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains
attached to your trigger gun.
2. Take the foam cannon and align the two tabs with the middle wand.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
middle wand and twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place and twist to lock.
FOR USE WITH
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the foam cannon and align the two tabs with the trigger gun.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
trigger gun, twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place.
FOR USE WITH
MOST SPX2000 SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the foam cannon and align the two tabs with the trigger gun.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
trigger gun, twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place.
FOR USE WITH
MOST SPX3000 AND SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the foam cannon and align the two tabs with the transfer adapter.
4. Once aligned, insert the tip of the locking collar on the foam cannon into the
transfer adapter
,
twist counter clockwise to lock into place.
5. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place and twist to lock.
NOTE:
1. There is a soap knob on the top of your SPX-FC26-RM. Turn it clockwise
to release soap, and counter clockwise to stop.
2. You can adjust the amount of soap you would like to release by turning the
front part of your SPX-FC26-RM. Turn clockwise for a larger spray, and
counter clockwise for a pin point spray.
Only use detergents specifically recommended for use with pressure
washers, such as Sun Joe
®
HOUSE + DECK WASH (SPX-HDC1G), Sun
Joe
®
SNOW FOAM AUTO WASH (SPX-FCS1G), or Sun Joe
®
HEAVY DUTY
CLEANER (SPX-APC1G).
DO NOT USE household detergents, acids, alkaline solutions, bleaches,
solvents, flammable material, or industrial grade solutions. These can
damage the pump.
S Support
If your Sun Joe
®
SPX-RB1-RM requires service or maintenance, please
call Snow Joe
®
+ Sun Joe
®
customer service at 1-866-SNOWJOE (1-866-
766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an authorized
dealer, you will need to provide the model and serial numbers, which can
be found on the decal located on the sprinkler. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle
of your new product:
Model #:
Serial #:
S P X - F C 2 6 - R M
