background image

6

Know Your Electric Snow Thrower

Read the owner’s manual and safety rules carefully before operating your electric snow thrower. Compare the illustration  

below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this  

manual for future reference.

1.  Switch bar lever
2.

 

Safety switch button

 

3.  Cord restraint holder 
4.  Upper handle
5.  Handle knobs
6.  Chute crank
7.  Crank adjustment knob
8. 

Chute deflector

9.  Lower handle

10. Auxiliary handle
11.

 Chute deflector knobs

12. Discharge chute
13. Wheel assembly
14. Side cover
15. Auger
16. Scraper blade

Technical Data

Rated Voltage ..........................120 V ~ 60 Hz
Motor .......................................14 A
No Load Speed .......................1750 ± 10% rpm
Rotor ........................................Steel auger with 2 rubber blades
Clearing Width .........................21 in. (53 cm)

Depth of Snow Cut .............................. 12 in. (30 cm)
Throw Distance Max  ........................... 20 ft (6 m) 
Plowing Capacity Max  ........................ 770 lbs/min (349 kg/min)
Directional Control ............................... 180º adjustable chute
Weight ................................................. 33.9 lbs (15.4 kg)

3

1

4

6

5

9

13

14

10

11

8

12

15

16

7

2

Содержание SUNJOE SJ624E-RM





















Отзывы: