SNOWJOE SUNJOE SJ618E-RM Скачать руководство пользователя страница 16

16

4.  Use your right hand to press the belt with the ribbed side 

down. While holding the belt down with your right hand, 

use your left hand to turn the auger forward so that the 

auger pulley rotates in a clockwise direction. The belt will 

be gradually pushed down onto the pulley. When the belt 

is seated on the pulley, adjust it so that the ribs of the belt 

match the grooves on the pulley. (Fig. 41).

5.  After the belt is installed, replace the side plate and secure 

it with the five screws (Fig. 38).

  NOTE: Heavy wet snow puts a load on belts, thus 

requiring more frequent belt replacement.

Storage 

1.  Allow the engine to cool completely before cleaning, 

storing, or transporting the snow thrower. Be 

sure to secure the unit while transporting.

2.  Disconnect the extension cord from the snow thrower. 

Inspect the extension cord closely for signs of wear or 

damage. Replace it if it is worn or damaged.

3.  Inspect the snow thrower carefully for worn, loose, or 

damaged parts. Check connections and screws and 

tighten if necessary. For repairing or replacing parts, 

contact your authorized Snow Joe

®

 + Sun Joe

®

 dealer 

or the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

4.  Store the unit, along with the disconnected extension 

cord, in a locked, dry place out of the reach of children to 

prevent unauthorized use or damage. Cover loosely with a 

tarp for added protection.

Service and Support

If your Snow Joe

®

 SJ618E-RM electric snow thrower requires 

service or maintenance, please call the Snow Joe

®

 + Sun Joe

®

 

customer service center at 1-866-SNOWJOE  

(1-866-766-9563).

Model and Serial Numbers 

When contacting the company, reordering parts or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

on the main cover of the unit to the left of the discharge chute. 

Copy these numbers into the space provided below.

Fig. 41

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

S   J    6   1   8   E    -    R  M

Содержание SUNJOE SJ618E-RM




















Отзывы: