10
Draining the Tank
If there is any liquid left in the tank after spraying, the tank
should be drained before cleaning. Do not store chemicals in
the tank.
1.
Unscrew the measuring cup and drain the tank thoroughly.
m
WARNING!
Always store and dispose of chemicals
properly. Disposal of contaminated water should be performed
according to local ordinances and by laws.
Clean the Tank
1.
Fill the tank about one-third full with clean water. and
shake to reach all areas of the inside of the tank.
NOTE:
Never use flammable chemicals or abrasive
cleaning agents to clean the tank.
2.
Drain the tank as directed above.
3.
Wipe the outside of the tank with a clean, dry cloth.
Clean the Nozzle
During longtime use, the nozzle may become clogged.
Follow the instructions below to clean clogged nozzle.
1.
Turn off the unit.
2.
Unscrew and remove the nozzle from the spray wand
(Fig. 10).
3.
Push a narrow string through the cross holes to clear any
debris (Fig. 11). If necessary, rinse the cross holes and
nozzle with clean water.
4.
Wipe the nozzle and cross holes with a clean dry cloth and
reinstall the nozzle.
Storage
1.
Examine the cordless chemical sprayer thoroughly for
worn, loose or damaged parts. Should you need to repair
or replace a part, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2.
Store the cordless chemical sprayer indoors in a locked,
ventilated, dry place out of the reach of children to prevent
unauthorized use or damage.
Service and Support
If your Sun Joe
®
SJ-APS-2G-RM cordless chemical sprayer
requires service or maintenance, please call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
S J - A P S - 2 G - R M
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
Fig. 10
Fig. 11
Cross hole