SNOWJOE Sunjoe PJ3600C-RM, Руководство оператора

Страница: 11 / 16

11
Storage
When the tool will not be used for several months, proceed as
follows:
• Fully charge the battery.
• Clean the product as describe above.
• Make sure that the blade lock knob is in the lock position,
then assemble the blade cover over the blades (Fig. 13).
• Store the tool in a secure and dry location. The storage
temperature must always remains in the range of
41°F (5°C) to 104°F (40°C).
• Before using the tool after prolonged storage,
fully recharge the battery.
Battery C Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead, or completely discharged. When burned, toxic fumes
and materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specific information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert batteries in the correct polarity, as
indicated in the battery compartment or manual, may
shorten the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc),
or Rechargeable (Nickel Cadmium, Nickel Metal Hydride,
or Lithium-Ion) batteries.
6. Do not dispose of batteries in fire. The cell of the battery
may explode.
7. Batteries should be recycled or disposed of as per state
and local guidelines.
S Support
If your Sun Joe
®
cordless pruner requires service or
maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your cordless pruner. Copy these numbers into the space
provided below.
Fig. 13
Blade cover
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
P J 3 6 0 0 C - R M