10
2. Join the upper handle frame to the lower handle frame
using the knob, washer and bolt provided (Fig. 5).
Repeat on the opposite side.
NOTE:
The upper handle is equipped with two sets of
holes on each side of the frame, however, only one set is
necessary to secure to the lower handle (Fig. 6). Simply
select your preferred height, and secure as shown (Fig. 5).
3. Secure the power cable to the lawn mower by using the
cable clips.
Grass Collection Bag As Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine
(Fig. 7).
2. Place the protective plastic straps onto the support rod
(Fig. 8).
3.
Lift the ejector flap with one hand. With the other hand,
hold the grass collection bag by the handle and hook it in
from above (Fig. 9).
Fig. 5
Upper handle
Washer
Knob
Bolt
Fig. 6
Upper handle frame
Shorter handle
setting
Longer handle
setting
R
Fig. 7
Support rod
Plastic
cover
R
Fig. 8
Support rod
Protective
plastic
straps
R
Fig. 9
Ejector flap
Grass collection
bag
