background image

8

Technical Data

Motor  .............................................................. 600 W Brushless
Battery Voltage Max*  ..................................  48V D.C. (2 x 24 V)
Battery Capacity  .............................................................  4.0 Ah
Battery Runtime Max  ............................................ 

LOW: 

20 min

 

HIGH: 17 min

Charger Input ....................................... 120 V AC, 60Hz, 160 W
Charger Output  ............................................  26 V DC, 2 x 2.2 A
Charge Time Max  .................................................... 1 hr 50 min
Max Water Inlet Temperature  .................................  104ºF/40ºC
Max Water Inlet Pressure  ............................................  0.7 MPa
Max Pressure at initial discharge  ................................  1196 PSI 

per CSA internal pressure testing
Rated Pressure under typical load  ...................... LOW 650 PSI

  

HIGH 800 PSI

Max Flow with nozzle open  ...........................................  1 GPM

at minimum pressure
Rated Flow under typical load  .........................  LOW 0.65 GPM

  

HIGH 0.77 GPM

Removable Bucket Capacity  ................................ 6.6 gal (25 L)
Foam Cannon Capacity  ...................................

 8.5 fl oz (0.25 L)

High Pressure Hose Length ....................................... 20 ft (6 m)
Net Weight  ........................................................  26 lbs (11.8 kg)

* Generates 48 V max with two 24 V lithium-ion batteries. Initial no-load voltage, 

per fully charged battery, peaks at 24 V. Nominal voltage under typical load is  

21.6 V.

Unpacking

Carton Contents

•  Water bucket

 assembly

•  Bucket lid
• 

Base unit

• 

Trigger gun

• 

Spray wand

•  5-in-1 Quick-Connect nozzle
• 

Needle clean-out tool

• 

Foam cannon

• 

Trigger gun holder

• 

High-pressure hose

•  Garden hose adapter (female coupler) 
•  Water inlet connector
•  iON+ 24V lithium-ion batteries (2)
•  iON+ 24V lithium-ion dual port charger
•  Manuals and registration card

1.  Carefully remove the pressure washer and check to see that 

all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new cordless 

pressure washer. The packaging is made of recyclable 

materials. Properly dispose of these materials in accordance 

with local regulations.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils, or small 

parts. These items can be swallowed and pose a suffocation risk!

m

WARNING!

 Do not insert the batteries until assembly is 

complete. Failure to comply could result in accidental starting and 

possible serious personal injury.

Battery Pack Operation

The equipment is powered by 2 lithium-ion batteries. The 

battery packs are completely sealed and maintenance free.

m

WARNING!

 The pressure washer can only be powered 

by both of the batteries together. Using one battery cannot 

provide sufficient power to start the tool. Make sure to use 

two batteries of the same voltage and the same capacity. 

Using the tool with batteries of different capacities will cause 

damage to the batteries.

m

WARNING!

 Before first use, the batteries require 1 hr 

50 min charge time to be fully charged. When the batteries 

are at low capacity, recharge for 1 hr 50 min again before 

resuming operation.

Battery Charge Level Indicator

The battery packs are equipped with a push button for 

checking the charge level. Simply press the push button to 

read off the battery charge level from the LEDs of the battery 

indicator:

•  All 3 level monitoring LEDs are lit: Battery charge level 

 

is high.

•  2 level monitoring LEDs are lit: Battery charge level is 

decreasing. Stop work as soon as possible.

•  1 level monitoring LED is lit: Battery is flat. Stop work 

IMMEDIATELY and charge the battery. Otherwise the 

battery’s service life will be greatly shortened.

Содержание sunjoe 24V-X2-PW1200-RM

























Отзывы: