10
m
CAUTION!
FIRE HAZARD. When
remove the batteries
from the charger, be sure to unplug the charger from the outlet
first, then remove the batteries from the charger.
m
WARNING!
This charger does not automatically turn
off when the batteries are fully charged. Please take care not
to leave the batteries in the charger. Switch off or unplug the
charger at the mains when charging is complete.
7. Timely recharging of the batteries will help prolong the
batter
ies' life. You must recharge the battery pack
s when
you notice a drop in the equipment's power.
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not insert batteries until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Lower Tube Assembly
1. Insert the lower tube into the end opening on the upper
tube (Fig. 5).
2. Secure the tube assembly using the provided retaining
screw. Tighten it with a Phillips head screw driver (Fig. 6).
Collection Bag Assembly
When the unit is to be used as a vacuum/mulcher, the
collection bag must be attached. Follow the instructions below
to install the collection bag.
1. Insert the collection bag adapter into the vacuum/mulcher
air outlet until the collection bag clicks in, then fasten the
bag strap to the strap hook
(Fig. 7).
2. To remove the bag, simply press the bag releasing button,
and pull the bag off (Fig. 8). Detach the strap from the
strap hook.
Fig. 4
Push lock
button
Fig. 5
Lower tube
Upper tube
Fig. 6
Lower tube
retaining screw
R
Fig. 7
Collection bag
Collection bag
strap hook
Collection
bag
adapter
Fig. 8
Collection
bag releasing
button