11
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
1. Flip up the stopper plug and attach the quick-connect end
of the hose to the water outlet/hose connection (Fig. 4).
To connect, pull back the connector collar and align the
connector with the water outlet, and release the collar.
You will feel a click when it snaps in.
NOTE:
The unit is equipped with a stopper plug to
prevent leaking when the hose is not connected, or during
transport. Be sure to insert the stopper plug completely to
ensure a secure, leak-proof connection.
2. Connect the other end of the hose to the spray gun
(Fig. 5). To connect, pull back the connector collar, align
with the end of the spray gun, and release the collar.
You will feel a click when it snaps in.
NOTE: To disconnect the hose, pull back the collar and
pull the hose away from the connector.
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
Operation
St Stopping
m
IMPORTANT!
This spray washer is equipped with a
micro-switch sensitive to water flow. This Total Stop System
(TSS) senses water flow in the pump. When the trigger is
released, water stops flowing through the pump. The TSS then
automatically turns the motor off to protect the pump from
overheating, thus saving energy and prolonging pump life.
m
WARNING!
Always remove battery before filling
with water. NEVER immerse unit in water. Close battery
compartment door securely before filling. Always use
caution when handling or using any powered product
where water is present.
1. Fill the water tank with clean water (Fig. 6).
m
WARNING!
The intake water temperature must not
exceed 140ºF/60ºC.
m
CAUTION!
The washer must only be used with clean
water; use of unfiltered water containing corrosive chemicals
will damage the washer.
Hose
Fig. 4
Connector
collar
Water
outlet
Stopper plug
Fig. 5
Spray gun
Hose
In order to operate this cordless spray washer you will need
an iON+ 24V System battery and charger. See page 16 for
battery and charger options and specifications, or for more
information visit sunjoe.com.
TOOL ONLY
B CHARGER SOLD SEPARATELY
Fig. 6
