8
NOTE: Be sure to retain the oil inlet nut in event that the
pressure washer needs to be transported.
NOTE: Use the oil inlet nut when transporting the pressure
washer. Before using the pressure washer again, you must
reinstall the oil measuring plug.
4. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 4).
5. Connect the high-pressure hose to the trigger gun (Fig. 5).
6. Connect the other end of high-pressure hose to the water
outlet on the washer (Fig. 6).
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
7. Thread your garden hose (male end) into the garden
hose adapter (Fig. 7). The garden hose must have an
internal diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
8. Attach garden hose to water supply (Fig. 8).
m
WARNING!
Do not connect to potable water system.
m
WARNING!
If connection is made to a potable water
system, the system shall be protected against backflow.
m
WARNING!
The intake water temperature must not
exceed 104ºF/40ºC. The water supply must not exceed
0.7 MPa.
m
CAUTION!
The washer must only be used with clean
water; use of unfiltered water containing corrosive chemicals
will damage the washer.
Fig. 4
Spray wand
Trigger gun
High-pressure hose
Trigger gun
Fig. 5
High-pressure
hose
Water outlet
Fig. 6
Fig. 7
Garden hose
Water inlet
Fig. 8
Connect to water supply
Garden hose
