SNOWJOE SJBLZD-LED, Руководство пользователя

Страница: 1 / 8

1
A Division of Snow Joe
®
, LLC
SJBLZD-LED
Form No. SJ-SJBLZD-LED-880E-MR1
OPERATOR’S MANUAL
LED LIGHTED 4-IN-1 ICE S
SNOW BROOM
© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
R
If you have any questions or comments, please call the Snow Joe
®
+ Sun Joe
®
Customer Service
department at: 1-866-SNOWJOE (1-866-766-9563)
CL
OS
E
OP
EN
A.
B. C. D.
m
Battery C Disposal Information
1. Batteries vary according to device. Use the correct size and type of battery specified by the manufacturer of
your device.
2. Install only new batteries of the same type in your product (where applicable).
3. Failure to insert batteries in the correct polarity, as indicated in the battery compartment or manual, may shorten
the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium, Nickel Metal Hydride,
or Lithium-Ion) batteries.
6. Do not dispose of batteries in fire.
7. Batteries should be recycled or disposed of as per state and local guidelines.
Battery Instal Operation
1. Make sure the unit is turned off and switch is in center position.
2. Locate battery compartment on the back panel of illum-n-broom. Loosen and remove
battery cover using a coin or slotted screwdriver. Your hand works pretty good, too.
NOTE: The battery compartment cover must be properly aligned to maintain a
watertight seal, and for easy removal later. To reinstall and properly realign the cover
threads, first place the broom head on a flat surface. Next, twist the cover two full
turns to the left, then twist right until tight.
3. Insert two AAA batteries as indicated in the battery compartment, ensuring proper
alignment.
4. Close battery compartment door and tighten to ensure watertight seal. Do not over-tighten.
NOTE: Slide on/off switch right to activate lights. Slide switch left to activate safety blinkers.
Attaching the Pole
A. Secure handle to head.
B. Twist pole to loosen.
C. Extend to desired length.
D. Twist to lock.
EN