9
3. Insert the female end of the extension cord into the
appliance's polarized male plug (Fig. 13).
4. Note that the snow thrower has a polarized male plug –
one prong in the plug is slightly longer and wider than the
other (Fig. 14). The extension cord female end should be
likewise polarized so that the extension cord fits snugly
into the appliance plug.
Powering On and Off
m
WARNING!
The auger starts rotating immediately after
the snow thrower is switched on. Keep hands and feet away
from the auger.
1. To switch the snow thrower ON, press the safety switch
button, then squeeze the switch bar lever (Fig. 15).
2. Once the snow thrower starts, release the safety switch
button and proceed with operation.
3. To power OFF, release the switch bar lever.
Utilize the LED Light
1. To utilize the LED light for nighttime snow removal, activate
the LED light switch located on the switch bar harness
(Fig. 16).
NOTE:
After you have finished using your snow thrower,
remember to turn OFF the light switch.
2. The LED light can be adjusted by moving it up and down
as depicted (Fig. 17).
Fig. 13
Extension
cord
Appliance
cord
Fig. 14
m
WARNING
m
Damaged electrical cords present risk of fire,
electrical shock and serious bodily injury.
Before operating the snow thrower, carefully examine
the electrical cord. If the cord is damaged, do not use
the snow thrower. Replace or repair the damaged cord
immediately. If you need assistance, contact an
authorized Snow Joe
®
+ Sun Joe
®
service center.
Fig. 15
Safety
switch
button
Switch bar lever
Fig. 16
LED light switch
Fig. 17
