background image

3

Safety Symbols

The following table describes safety symbols that may appear on this product. Read, understand and follow all instructions on 

the machine before attempting to assemble and operate.

It is obligatory at all times to wear 

goggles or a visor to protect the 

eyes and face.

Disconnect the plug before 

conducting maintenance or when 

it is damaged or tangled. Do not 

use this product in the rain or 

leave outdoors while it is raining.

Wear safety gloves during  

use to protect hands.

Beware of stones and other 

objects that could be thrown 

from the appliance. Keep all 

bystanders and domestic 

animals a safe distance away 

from the work area.

Keep feet away from the moving 

parts of the snow thrower. The 

rotating parts can cause severe 

bodily injury.

Keep hands and feet away 

from the rotating parts.

Wear safety footwear at all 

times to provide protection 

against objects that may 

accidentally fall on feet.

Keep hands away from the 

moving parts of the snow 

thrower. The rotating parts can 

cause severe bodily injury.

The rotating part will 

continuously run for several 

seconds after you turn off 

 

the machine.

Double insulation.

Keep the flexible power supply 

cord away from the cutting blades.

Always keep the power cable 

away from heat sources, oils or 

sharp edges. Immediately remove 

plug from the mains if the cable is 

damaged or entangled.

Symbols

 

  

Descriptions

Symbols

 

    

Descriptions

STOP

READ THE OPERATOR'S 

MANUAL(S) – Read, 

understand and follow all 

instructions in the user 

manual(s) before attempting to 

assemble and operate.

SAFETY ALERT – Indicates  

a precaution, a warning or  

a danger.

Содержание SJ620














Отзывы: