SNOWJOE POWERJOE PJ4SDFLX-RM, Руководство оператора

Страница: 7 / 16

6
Unpacking
Carton Contents
• Cordless screwdriver
• 11 pcs of 25 mm driver bits (with bit holder)
• 50 mm Phillips bit
• 50 mm flat-head bit
• Flexible bit extender
• Battery charger
• Manual with registration card
1. Carefully remove the cordless screwdriver and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
screwdriver. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Before Using
m
WARNING!
Before first use, the battery requires at least
5 hours charge time to be fully charged. Recharge for 3-5
hours again before resuming operation.
NOTE: The charge level indicator LED light will illuminate red
when the charger is plugged in and is charging the screwdriver.
When the battery is fully charged, the charging process stops
and the charging indicator light will automatically turn OFF.
Charging Procedure
m
WARNING!
The battery charger supplied matches
the lithium-ion battery installed in the tool. Do not use other
battery chargers.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
m
WARNING!
Continued and excessive overuse of the
ON/OFF trigger switch can permanently damage the lithium-
iON battery.
The charging process starts as soon as the charger is plugged
into both the proper electrical outlet and the tool.
• During the charging procedure, the handle of the tool will
feel slightly warm to the touch. This is normal.
• When no further use is planned for an extended period of
time, disconnect the battery charger from the outlet and the
unit.
• Do not use the tool during the charging procedure.
Battery Charge Level Indicator
The screwdriver is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator
(Fig. 1):
• (Red, Yellow, Green) All 3 level monitoring LEDs are lit:
Battery is at full capacity.
• (Red & Yellow) 2 level monitoring LEDs are lit: Battery is
at 70% capacity and requires charging soon.
• (Red) 1 level monitoring LED is lit: Battery is at 30%
capacity and requires charging.
Battery Charging
The length of service between each charging varies depending
on the type of work you are doing. The battery in this
screwdriver has been designed to provide maximum trouble-
free life. However, like all batteries, it will eventually wear out.
To obtain the longest possible battery life, we suggest the
following:
• Store and charge your screwdriver in a cool area.
Temperatures above or below normal room temperature
will shorten battery life.
• Never store the screwdriver with the battery in a
discharged condition. Recharge the unit immediately after
it is discharged.
• All batteries gradually lose their charge. The higher the
temperature is, the faster they lose their charge. If you
store your screwdriver for long periods of time without
using it, recharge the battery every 6 months. This will
extend battery life.
Fig. 1
Charging
indicator
light Push button
for battery
indicator
Lights Colors Light Indicators
Red, yellow, green Full power
Red & yellow 70% power
Red 30% power