SNOWJOE Martha Stewart MTS-EDG1 страница 6 Скачать руководство пользователя

Страница: 6 / 16

Unpacking

Carton Contents

• Edger + trencher motor housing

with lower shaft bolt and nut

•  Telescopic shaft adjustment knob and bolt
•  Auxiliary handle
•  Auxiliary handle knob + bolt
•  Wrench
•  Spanner
•  Manual with registration card

1. Carefully remove the electric edger + trencher and check

to see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use the electric edger +

trencher. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations or save the packaging for long-term

product storage.

IMPORTANT! The equipment and packaging material are not

toys. Do not let children play with plastic bags, foils, or small

parts. These items can be swallowed and pose a suffocation

risk!

Assembly

Assembling the Handle

1. Slide the lower shaft down into the motor housing and

align the screw holes (Fig.1).

2. Secure the telescoping shaft with the bolt and nut (Fig. 2).
NOTE: When you first insert the bolt it may be necessary

to wiggle it carefully to get it past the jacketed wire inside

the tube.

CAUTION!

NEVER use a sharp object to move jacketed

wires out of the way.

Adjusting the Telescopic Shaft

The telescopic shaft can be set at three different heights.

1. To set the height for your comfort, slide the telescopic

shaft up to the level required using one of the three holes

provided.

2. Insert the bolt through the hole and tighten the knob fully

locking the two shafts in place (Fig. 3).

NOTE: When first assembling the shaft to the trencher

+ edger, the shafts should be pulled fully up to allow the

cord to sit correctly in the tubes and motor housing.

Assembling Auxiliary Handle

1. Assemble the auxiliary handle onto the main handle by

inserting the bolt into the auxiliary handle and tightening

the handle with the auxiliary handle knob provided (Fig. 4).

Fig. 1

Lower shaft

Motor housing

Fig. 2

Bolt

Nut

Telescoping shaft

Fig. 3

Telescopic shaft

adjustment knob

Bolt

Upper

shaft

Lower

shaft

Fig. 4

Auxiliary handle knob

Handle

Bolt

Auxiliary

handle

Содержание Martha Stewart MTS-EDG1

















Результаты поиска

Содержание Martha Stewart MTS-EDG1

Отзывы:

Похожие инструкции для Martha Stewart MTS-EDG1

Бренды по названию

Популярные бренды

SNOWJOE Martha Stewart MTS-EDG1, Руководство оператора

Результаты поиска

Содержание Martha Stewart MTS-EDG1

Отзывы:

Похожие инструкции для Martha Stewart MTS-EDG1

Бренды по названию

Популярные бренды