8
St Stopping
1. To start the electric
snow shovel,
push and hold the safety
lock switch on the side of the handle grip with your thumb
and then squeeze the trigger switch with your fingers.
Once the machine powers on, you can release the safety
lock switch and proceed with operation (Fig.
7
).
2.
To stop the electric snow shovel, release the trigger
switch.
Operating Tips
• Ensure that the scraper blade at the base of the unit
contacts the ground and start the electric snow shovel.
Push the shovel forward at a comfortable rate, yet slow
enough to clear the path completely. The clearing width of
the snow shovel and the depth of snowfall should dictate
your forward speed.
•
Direct the snow discharge to the right or to the left by
holding the electric snow shovel at a slight angle.
• To remove snow most efficiently, throw the snow
downwind and slightly overlap each swath.
• If you need to clear snow from a crushed rock or gravel
surface, tilt the handle down to raise the scraper bar up
enough to clear any loose material that could be picked
up and thrown by the auger.
• This electric snow shovel cuts a path 10 in. (25.4 cm) wide
and up to 6 in. (15 cm) deep in one pass.
• When clearing deeper drifts, hold the electric snow shovel
by the upper and lower handles and use a swinging or
sweeping motion. Remove up to 6 in. (15 cm) of snow with
each pass and repeat as many times as needed.
• Keep the cord clear of obstructions, sharp objects and the
rotating auger. Do not pull sharply on the cord or abuse
it in any manner. Frequently inspect the cord for signs of
damage. If damage is found, replace the cord immediately.
• Disconnect the extension cord after using the electric
snow shovel. Hang the extension cord with the shovel so
it will not be misplaced or damaged.
Maintenance
To order genuine replacement parts or accessories for the
Snow Joe
®
320E-ES electric snow shovel, please visit
snowjoe.com or contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
m
WARNING!
Disconnect the extension cord before
performing any maintenance task.
If the extension cord is plugged into the appliance, someone
could accidentally turn on the unit while you are performing
maintenance on it, which could result in serious personal injury.
Lubricating the Electric Snow Shovel
This electric snow shovel does not need lubrication.
All bearings are lubricated at the factory for the life of the
product.
Storage
1.
Examine the electric snow shovel thoroughly for worn,
loose or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2.
Examine the extension cord thoroughly for signs of excess
wear or damage. If it is worn or damaged, replace it
immediately.
3.
Disconnect the extension cord from the electric snow
shovel before storing.
4. Store the cord with the electric snow shovel indoors in a
clean, dry and locked location out of the reach of children
and animals.
NOTE:
Devices for retaining extension cords are
commercially available, should you wish to purchase one.
5. For added protection a
gainst snow, ice, sun damage, rain,
dust, tree sap and birds, cover your electric snow shovel
with the Snow Joe
®
Universal Fit Snow Shovel Cover
(Model SJCVR-13). To order this cover online, visit
snowjoe.com or, to order by phone, call 1-866-SNOWJOE
(1-866-766-9563).
Fig. 7
Trigger switch
Safety lock switch
Содержание 320E-ES
Страница 12: ...snowjoe com...
