background image

14

2. 

The LED light can be adjusted by moving it up and down 

as shown (Fig. 145).

Changing Throw Direction and Throw 

Height

1.  The discharge chute can be controlled 180 degrees by 

rotating the chute with the chute control lever (Fig. 15).

2. 

The chute deflector on the top of the discharge chute 

controls the height of the snow stream. Loosen the knobs 

to raise or

 lower the deflector to the desired height of 

snow you wish to throw. Tighten the knobs to secure the 

deflector (Fig. 

16).

Maintenance

To order genuine replacement parts or accessories for the 

Snow Joe

®

 24V-X2-SB18U-CT-RM cordless snow blower, 

please visit snowjoe.com or contact the Snow Joe

®

 + Sun 

Joe

®

 customer service center at 1-866-SNOWJOE (1-866-766-

9563).

Lifetime Lubrication (Motor + Auger)

Lubrication is not necessary and may damage the unit.  

The snow blower is lubricated for lifetime use at the factory 

before shipment.

General Maintenance Tips

m

WARNING!

 Always switch the product off, remove 

the batteries, and let the product cool completely before 

inspecting, cleaning, or performing any other maintenance 

task.

m

WARNING!

 Only perform the repairs and maintenance 

work described in this manual. Any other work must be 

performed by a qualified technician.

1.  Do not attempt to repair the machine unless you have the 

proper tools and instructions for disassembly and repair of 

the machine.

2.  Check 

bolts and screws at frequent intervals for proper 

tightness to ensure that the equipment is in safe working 

condition.

3. 

After each snow removal session, run the snow 

blower 

for a few minutes to prevent the collector/impeller from 

freezing. Shut off the motor, wait for all revolving parts to 

stop 

completely, and wipe residual ice and snow off the 

unit. 

Rotate the chute deflector by the chute control lever 

several times to remove any excess snow.

Fig. 14

LED light switch

m

         

WARNING 

 

m

Never direct the snow discharge chute at the operator, 

at bystanders, at vehicles, or at nearby windows. The 

discharged snow and foreign objects accidentally 

picked up by the snow blower can cause serious 

damage and personal injury.
Always orient the discharge chute in the opposite 

direction from where you, bystanders, surrounding 

vehicles, or windows are located.

Fig. 15

Chute control 

lever

Fig. 16

Chute deflector

Chute 

deflector 

knob

Содержание 24V-X2-SB18U-CT-RM





















Отзывы: