10
2. Insert a bolt through the aligned holes in the poles
and secure the other end with a knob (Fig. 5). Twist
until tight.
3. Connect the upper pole + middle pole assembly with the
lower pole assembly. Align the screw holes (Fig. 6).
4. Insert a bolt through the aligned holes in the poles
and secure the other end with a knob (Fig. 7). Twist
until tight.
NOTE: To avoid the wiring inside the poles intervening the
assembly
, make sure to
connect the upper pole assembly
and the middle pole assembly
first
. You may have to
carefully move the wiring inside the poles to one side
when inserting the bolt.
Operation
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick up
and throw. Such items could be covered by snow and are easy
to overlook, so be sure to conduct a thorough inspection of the
area before beginning work.
Starting the Machine
1. Slide the battery down in the battery compartment until it
clicks to lock it into position (Fig. 8).
2. To start the cordless
snow shovel,
push and hold the
safety lock switch on the side of the handle grip with your
thumb and then squeeze the On/Off switch with your
fingers. Once the machine powers on, you can release the
safety lock switch and proceed with operation (Fig. 9).
Fig. 4
Upper pole
assembly
Middle pole
assembly
Fig. 5
Pole knob
Bolt
Fig. 6
Upper pole +
middle pole
assembly
Lower pole
assembly
Fig. 7
Pole knob
Bolt
Fig. 8
Battery
Battery
compartment
