background image

3

Battery & Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.

Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 Read all safety warnings and instructions. 

Failure to follow the warnings and instructions may

result in electric shock, fire and/or serious injury

m

WARNING!

 Use only approved replacement batteries; 

other batteries may damage the snow blower and cause it to 

malfunction.

m

CAUTION!

 

To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery packs only in their designated

iON+ 24V lithium-ion charger. Other types of chargers present 

risk of fire, personal injury and damage. Do not wire a battery 

pack to a power supply plug or car cigarette lighter. Such 

misuse will permanently disable or damage the battery pack.

• 

Avoid dangerous environments – Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE: The safe temperature range for the battery is  

-4°F – 113ºF (-20°C – 45°C). Do not charge the battery 

outside in freezing weather; charge it at room temperature. 

• 

Maintain charger cord –

 When unplugging the charger, 

 

pull the plug, not the cord, from the receptacle to reduce 

the risk of damage to the electrical plug and cord.  

Never carry the charger by its cord or yank it by the cord 

to disconnect it from the receptacle. Keep the cord away 

from heat, oil and sharp edges. Make sure the cord will not 

be stepped on, tripped over or subjected to damage or 

stress when the charger is in use. Do not use the charger 

with a damaged cord or plug. Replace a damaged charger 

immediately.

• 

Do not use an extension cord unless it is absolutely 

necessary – 

Using the wrong, damaged or improperly 

wired extension cord poses a risk of fire and electric shock. 

If an extension cord must be used, plug the charger into a 

properly wired 16 gauge or larger extension cord with the 

female plug matching the male plug on the charger. Make 

sure that the extension cord is in good electrical condition.

• 

Charger 24VCHRG-DPC is rated for 120 volt AC only –  

The charger must be plugged into an appropriate 

receptacle.

• 

Use only recommended attachments – Use of an 

attachment not recommended or sold by the battery 

charger or battery pack manufacturer may result in risk of 

fire, electric shock or personal injury.

• 

Unplug charger when not in use – Make sure to remove 

battery packs from unplugged chargers.

m

WARNING! 

To reduce the risk of electric shock, 

always unplug the charger before performing any cleaning 

or maintenance. Do not allow water to flow into the charger. 

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock 

hazards.

• 

Do not burn or incinerate battery packs – Battery packs 

may explode, causing personal injury or damage. 

 

Toxic fumes and materials are created when battery packs 

are burned.

• 

Do not crush, drop or damage battery packs – Do not 

use the battery pack or charger if they have sustained a 

sharp blow, been dropped, run over or have been damaged 

in any way (i.e. pierced with a nail, hit with a hammer, 

stepped on, etc.).

• 

Disconnect the battery pack from the appliance before 

making any adjustments, changing accessories,  

or storing appliance – Such preventive safety measures 

reduce the risk of starting the appliance accidentally.

  Avoid unintentional starting – Make sure the safety switch 

and the switch lever are in the off position before inserting 

the battery in the unit. Do not carry the snow blower with 

the safety switch and the ON/OFF trigger engaged.

  When battery pack is not in use, keep it away from other 

metal objects –

 like paper clips, coins, keys, nails, screws 

or other small metal objects that can make a connection 

from one terminal to another. Shorting the battery terminals 

together may cause burns or a fire.

  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact –  If contact accidentally 

occurs, flush with water. If liquid contacts eyes, additionally 

seek medical help. Liquid ejected from the battery may 

cause irritation or burns.

  Do not use a battery pack or appliance that is damaged 

or modified – Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or risk of 

injury.

  Do not expose a battery pack or appliance to fire or 

excessive temperature – 

Exposure to fire or temperature 

above 130°C (265ºF) may cause explosion.

Содержание 24V-AJC-LTE-RM





















Отзывы: