background image

765042231 Rev.000

 

GENERAL INSTRUCTIONS ON DELIVERY 

 

 

GENERAL WARNINGS 

 
We assure you have made the best choice in purchasing our products and hope you will be fully satisfied 
with our their performance. To this purpose, we recommend you strictly comply with the instructions and 
regulations contained in this handbook..  
The user is required to carefully read the manual, always referring to it and conserving it in a known place, 
accessible to all authorised operators. 
The equipment is destined only for the function for which it was designed and, being for professional use, must 
be used only by qualified personnel. 
The manufacturer declines all responsibility and any obligation to warranty if damage occurs to the equipment, 
persons or things, imputable to incorrect installation, inappropriate use by untrained personnel, non specific 
modifications or interventions, use of non original or non specific replacement parts, failure to observe, even 
partially, the indications found in this manual. 
Please remember that no reproductions of this handbook are allowed. Due to our constant technological 
updating and research, the features described in this handbook may be altered without prior notice. 
 
 
 

LIST OF REGUALATION REFERENCES 

 
The cooling cabinet we manufacture fully complies with the following European and national regulations: 

 

2006/42 (machine regulations) 
2006/95 (low-voltage regulation) 
2004/108 (EMC regulation) 
97/23 (PED regulation) 
93/68 (new approach regulation) 
2002/95 (RoHS regulation) 
2002/96 (RAEE regulation) 
658/88 CEE 
108/89 CEE 
DPR 327/80 art.31 (Italy) 

D.M. 15-06-71 (Italy) 
D.L. n°110 27-01-92 (Italy) 
J.O. 16-07-74 n°74-163 (France)  
 
and the following European regulations: 
EN55014-1;EN55104-2 
EN61000-3-2 ; EN61000-3-3 
EN60335-1;EN60335-2-89 
EN378-I-II

 
 
 

TRANSPORTATION AND HANDLING 

 
For  transportation  and  handling,  all  precautions  necessary  must  be  taken  in  order  not  to  damage  the 
equipment, referring to the indications found on the packaging of the same. 
Make sure that the consignment has not been tampered with or damaged during transport.  
 
 
 

 

Содержание 965780515






































Отзывы: