#56663 SNOW THROWER OPERATOR’S MANUAL
9
Upper Frame Assembly
For easier assembly, the handle frames are marked with yellow
tape from the factory. This tape indicates the LEFT side of
each handles part, as viewed from the operator’s position of the
Snow Thrower.
Hold the Upper Frame with the yellow tape on the LEFT side
so that the screw holes align with the holes on the Middle
Frame. (Fig. 3)
Insert a T-bolt into each hole with the head on the inside of the
handle. Then attach a saddle washer and knob on the outside
and tighten. (Fig. 4)
Repeat this step on the other side of the handle.
Locate the three Cable Clips in the parts bag. Secure the power
cord to the frame of the unit by clipping them onto the frame at
evenly spaced intervals. (Fig. 5)
Содержание 56663
Страница 1: ......
Страница 16: ...56663 SNOW THROWER OPERATOR S MANUAL 16 EXPLODED VIEW...
